Explore the knowledge base through the menu on the left.

Search for answers by refining the results through the drop-down categories.

Category - General

Articles

ZowieCam operating temperature
How to use OSD menu to adjust output resolution
How to use Tally Light
How to use shortcut functions
How to use button to operate OSD menu
How to check ZowieCam’s IP Address
How to adapt the button direction to the output direction
How to perform noise reduction
How to flip the encoding screen
How to flip the output screen
How to set up when the color is incorrect
Why sometimes using the OSD menu to modify parameters is not effective?
How to record videos with ZowieCam
How to switch to standby mode
Why sometimes using the OSD menu to modify parameters is not effective?
How to set up when the color is incorrect
How to Use OSD Scoreboards
How to use OSD timestamps
How to use NAS to save video file
How to stream to Twitch?
Click the link below to get the server URL. https://help.twitch.tv/s/twitch-ingest-recommendation?language=en_US Please choose the server URL closest to the location for a more stable streaming experience. Copy the server URL part in the red box. Log in to Twitch’s official website, click on the avatar on the right and then click on Creator Dashboard. Click the...
How to stream to Wowza
1、Log in to Wowza’s official website and click Add Live Stream. 2、Enter a custom stream name and select the nearest server address for a better streaming experience. 3、Select the required streaming protocol and encoding resolution. Currently, the protocols supported by ZowieBox are RTMP and SRT. If the actual resolution is different from the set resolution,...
How to stream to Facebook?
First, please log in to Facebook’s official website and reach the push setting page as shown in the figure below. Click Go live to get Facebook’s push address and key. Log in to the ZowieBox web console and ensure there is video signal input. Click Setting -> Streaming-> Internet to reach the Internet stream configuration...
How to stream to YouTube
Why is the image green or unavailable when input to the monitor/ATEM?
Please check the color bit supported by the monitor/switcher first. If it is a Feelworld series video switcher, please try to set the color bit to 8bit. https://zowietek.com/knowledge-base/feelworld-output-cannot-be-detected/ If you are using an ATEM mini pro, please check whether you are using the input 1 of the ATEM. Please try using other input ports. Currently,...
Suggestions for audio asynchrony during streaming to YouTube
How to change the lens?
How to change the lens(Click to watch the video)
How to improve ZowieCam temperature/fan sound
How to improve the asynchrony of audio and video during recording
If you find that the audio and video are not synchronized when using ZowieCam or ZowiePTZ to record. Please make sure that the NDI/HDMI signal output by the camera is synchronized with the audio and video Please make sure that the storage device used meets the requirements, as shown in the following link: https://zowietek.com/knowledge-base/recommendations-for-storage-device-speed/ Please...
How to improve the jitter of the AF model ZowieCam
Please log in to the web control interface of ZowieCam and try to change the focus mode to manual mode or turn on AF lock. Make sure that the jitter is not caused by changes in the picture.   If the picture still jitters when focusing in manual mode, please make sure that the camera...
How to correct the image blur in one corner for ZowieCAM M12 AF?
How to upgrade Zowietek products?
Upgrade Troubleshooting
Please make sure that you do not use mDNS to log in to the webpage during the upgrade process. To ensure stability during the upgrade process, the mDNS function will be turned off after the upgrade is detected, resulting in upgrade failure. When using a USB flash drive or TF card for upgrade, please make...
How to use NDI multicast?
Hardware Version and Compatibility
In order to continuously improve and optimize the functions of Zowietek products, All Zowietek products has gone through multiple hardware version iterations. The specific hardware versions and corresponding functions are as follows: ZowieCam y=1(M12),2(CS),or 3(AF) Hardware Version UVC Out Fan Mode SDI Output 4k30->1080p30 4.y.2 × × √ 4.y.3 × × √ 4.y.6 × ×...
How to configure SRT related parameters?
SDI Incompatible Devices
How to use NDI Discovery Sever to achieve cross-segment encoding and decoding
How to stream to OBS by SRT
How to switch USB between host and device mode
How to use ZowieAPI with Bitfocus Campanion and Stream Deck for scheduled recording
+ 20 Articles
Show all articles