Articles
Download and install the Stream Deck App.Connect Stream Deck directly to a USB port on your PC.
To use Stream Deck and Bitfocus company in combination, you need to configure the company first. →GUIDE
Now you should install the Companion button plugins...
First, download the folder from the website https://github.com/glikely/obs-ptz and choose the asset
"ptz-controls-v0.10.4-Windows.zip" as seen below.Second, open the compressed file and choose the true bit folder.
Now go to the folder as seen below. Depending on where the OBS is installed, it will change...
Here are current PTZ camera IR commands that can be done from the supplied IR remote control 1. Standby Key Press this button to enter standby mode. Press it again to enter normal mode. Note: Power consumption in standby mode is approximately half of the normal mode 2. Number Key To set preset or call...
First, make sure your camera is connected to the network. Log in to the camera’s web interface, make sure NDI is enabled. Click on the page in sequence as seen below. You can look up the camera’s NDI name. NDI will automatically detect your device. Now click “NDI studio monitor” and choose the “device name”. Finally,...
Step 1: Open vMix Software, click “Configure various Input settings”. Step 2: Select the PTZ device type that matches your camera from the Device Type dropdown box. Entering in the PTZ camera network address, then connecting to the PTZ camera. Once the Device Type and Address have been selected, click “Connect” to connect the camera. If successful,...
