Articles
Preparation Inside the box, please find 1) PTZ Camera 2)Power supply and power cord 3)Remote control WARNING: Don’t move or rotate the camera by seizing the camera head. You also need 1)Two AAA alkaline batteries for the remote control 2)Video monitor with HDMI input, or SDI input 3) RJ45 LAN cable. 4) PC or Laptop. Connection Connect HDMI output as the diagram to video monitor. If you are professional and have an SDI monitor, you can also try connecting the SDI output to the video monitor instead. Power on Connect the power supply, no power switch. Instantly, you will see the camera starts to rotate to its default parking position of the front middle. A LED in front will be in RED flash and turn to stead GREEN in a couple of seconds. Now, you will see crystal and beautiful video pictures on the monitor. Control the Camera by Remoter...
An explanatory diagram is included.
Notice：Don’t update the camera at will, or the camera will not work .
Open web browser, type camera’s IP address to go to the camera login page. Log in to the camera ‘s web interface.
Click the "Configuration" and then click "Upgrade".
Mail to us all the version information.
We will send you the update file.
Now choose "Update File" and click "Upgrade".
Or we’ll help you update remotely...
Check the button dial switch of the PTZ camera.
Two DIP switches are set to ON or OFF to select different modes of operation as shown in picture.
Note: Working mode can be applicable dor web upgrade...
1. Login 1) Open Browser, for example, Google Chrome, and enter the IP address of the NDI camera: default “192.168.5.163”. Login with username and password: both are “admin”. Please select English in the upper right corner before you log in. 2) It is suggested for users change the IP Address of their camera. The camera...
How to install the PTZ Camera by ceiling mount？
