Category - PTZ Network Controller 90950-222

   

1. Visit the camera’s IP address, and make sure the camera has open ONVIF protocol. 2. Connect the camera and joystick controller in the same LAN and ensure their IP address in the same network segment. Such as 192.168.1.123 & 192.168.1.111 belong to the same network segment, while 192.168.1.123 & 192.168.0.125 do not belong to...

(1) Press <SEARCH> to the search device, move the red cursor to the right to jump into the search, press the middle button of the joystick to confirm the search for the device, select the device to be added, press OK, and then move the red cursor to New. Enter the camera user name and...

(1) SET PRESET: Example: Set Preset 1 [SET PRESET ] > [1] > operate the camera> [ENTER] A. Press [SET PRESET] button, and the text “Set preset ” appears in the lower right corner of the screen. B. Press the number [1], the number 1 appears on the screen in the back of the “Set...

Per camera can be set to the MAX 99 Presets

  Yes. Even though the PTZ controller are running power over PoE, it is not affected if you turn it off because the PTZ controller consists of external AC power outlet, it installs separately to your network switch

First, you need to go into the camera settings to mirror the video. Step1: Press the 【MENU】button in remote control and then select 【Camera】 Step 2：Select 【Image】 Step 3：select 【Flip-V】to Flip the screen Second, you need change your control habits. By moving the joystick to the left, the camera moves to the left with itself as...

  It works with all camera systems that use ONVIF protocol no matter what resolution the camera is. But the controller could only decode videos with 1080P60. You can’t watch the 4K video at the LCD screen.

  No. It only support ONVIF protocol.

  No. Only the Ethernet interface works. It only support ONVIF protocol.

  Yes, but you need to upgrade the firmware. If you need, please contact us.

Step 1: Move joystick to select [gateway] Step 2: Press the button [CLEAR] to delete number “254” Step 3: Press the button [1] to input 1 Step 4: Press down the joystick to save settings