Connect the HDMI output port of PS5/4 to the HDMI IN of ZowieBox, and also connect the HDMI OUT of ZowieBox to a TV or monitor. Then, visit the Settings > System section of the PlayStation 5/4 interface, and turn off Enable HDCP. After that, you can use your PlayStation 5/4 with ZowieBox .
ZowieBox connects to the Xbox Series using HDMI. It can passthrough video to a TV set also using HDMI. An HDMI cable is included in the box. Before you set things up, make sure to connect your Xbox Series directly to your TV set or display via HDMI, without using ZowieBox. After that, you can use your Xbox Series with ZowieBox .
The Nintendo Switch itself does not have a video out port – you cannot connect it directly to ZowieBox, no matter what adapter you try to use. Instead, you must connect it to the special Nintendo Switch Dock that comes with the Nintendo Switch. That Dock has HDMI out. 1) Plug one end of an HDMI Cable into the HDMI...
ZowieREC can record videos from disc player, set-top box, PVR, PS3, Source Games, GAME DEVICE 360, GAME DEVICE One, Wii, VCR, etc.
1. Reboot ZowieBox: Click “System > Default > Reboot” on the Web console to reboot ZowieBox. 2. Restoring factory setting： Click “System > Default > Restore factory default settings” on the Web console. Notes: a. Restoring factory settings will reset all information except record and WIFI, please choose carefully. b. The username and password of...
1. Type the IP Address of your ZowieBox into the browser. (The initial Admin Login Username and Password are both admin.) 2. Click “System > Update” on the Web console. 3. Click “Choose file” to upload the correct firmware file. 4. Click “Upgrade” to start the upgrade. Note: After clicking upgrade, ZowieBox will automatically upgrade...
Yes. In order to use the feature.1. A PoE network work switch has to be available in the connected network.2. At least a CAT5e LAN cable has to be used.3. It can go even 100 meters (328 feet). In this case, a better LAN cable, such as CAT6 and higher, is recommended.
The default login account and password are both admin.
1. Type the IP Address of your ZowieBox into the browser. (The initial Admin Login Username and Password are both admin.) 2. Click “System>System”. 3. Change the device name. 4. Click “Save”.
1. Type the IP Address of your ZowieBox into the browser. (The initial Admin Login Username and Password are both admin.) 2. Click “Network>LAN”. 3. Close the “IP (DHCP)”. 4. Set the IP address for ZowieBox. 5. Click “Save”.
Yes, it supports scheduled recording. You can set it for specific times, daily, or weekly
Yes, it supports 4K60 and 1080P120 input, with loop-out at 4K60 or 1080P120, recording and streaming are downgraded to 1080P60.
Sorry. It will report HDCP error for Content Protection
The default recording bitrate of Recorder is 12000kbps. To meet the various needs of users, users can also customize the bitrate after connecting to the network. Recorder supports a bitrate range of 64kbps~512000kbps
Yes，it can record.
No, it doesn’t support HDR.
Yes, it supports 4K60 and 1080P120 input, with loop-out at 4K60 or 1080P120, recording and streaming are downgraded to 1080P60.
Our HDMI input interface is HDMI2.0, if 2.1 and 8k HDMI cables are backward compatible with 2.0, then they can be supported.
Yes，if you input 4K60, it can loopout 4K60, if you input 4K 30, it can output and loopout 4K 30.
Yes, Recorder supports HDMI output of most game consoles such as computers, PS5, XBOX, Switch, etc., and supports HDMI loop output with zero delay.
Recorder supports common HDMI signal source input and long-term recording. It can output the HDMI of the surveillance camera to Recorder and record it.
Yes, you only need to transfer the non-HDCP protected content to the Recorder via an HDMI cable to record it.
Not supported.
Of course, Recorder supports pausing and restarting the recording process for unlimited times and durations.
Yes, Recorder does not require an Internet connection, and you can use a Bluetooth remote control to directly record.
Currently, Recorder does not support watching one program during recording.
Yes, when the recorder is connected to the Internet, you can use an iPhone, Android phone, computer, or ipad to log in to the web console of the recorder to perform recording operations.
