Articles
Connect the HDMI output port of PS5/4 to the HDMI IN of ZowieBox, and also connect the HDMI OUT of ZowieBox to a TV or monitor. Then, visit the Settings > System section of the PlayStation 5/4 interface, and turn off Enable HDCP. After that, you can use your PlayStation 5/4 with ZowieBox .
ZowieBox connects to the Xbox Series using HDMI. It can passthrough video to a TV set also using HDMI. An HDMI cable is included in the box. Before you set things up, make sure to connect your Xbox Series directly to your TV set or display via HDMI, without using ZowieBox. After that, you can use your Xbox Series with ZowieBox .
The Nintendo Switch itself does not have a video out port – you cannot connect it directly to ZowieBox, no matter what adapter you try to use. Instead, you must connect it to the special Nintendo Switch Dock that comes with the Nintendo Switch. That Dock has HDMI out. 1) Plug one end of an HDMI Cable into the HDMI...
ZowieREC can record videos from disc player, set-top box, PVR, PS3, Source Games, GAME DEVICE 360, GAME DEVICE One, Wii, VCR, etc.
1. Reboot ZowieBox: Click “System > Default > Reboot” on the Web console to reboot ZowieBox. 2. Restoring factory setting： Click “System > Default > Restore factory default settings” on the Web console. Notes: a. Restoring factory settings will reset all information except record and WIFI, please choose carefully. b. The username and password of...
1. Type the IP Address of your ZowieBox into the browser. (The initial Admin Login Username and Password are both admin.) 2. Click “System > Update” on the Web console. 3. Click “Choose file” to upload the correct firmware file. 4. Click “Upgrade” to start the upgrade. Note: After clicking upgrade, ZowieBox will automatically upgrade...
Yes. In order to use the feature.1. A PoE network work switch has to be available in the connected network.2. At least a CAT5e LAN cable has to be used.3. It can go even 100 meters (328 feet). In this case, a better LAN cable, such as CAT6 and higher, is recommended.
The default login account and password are both admin.
1. Type the IP Address of your ZowieBox into the browser. (The initial Admin Login Username and Password are both admin.) 2. Click “System>System”. 3. Change the device name. 4. Click “Save”.
1. Type the IP Address of your ZowieBox into the browser. (The initial Admin Login Username and Password are both admin.) 2. Click “Network>LAN”. 3. Close the “IP (DHCP)”. 4. Set the IP address for ZowieBox. 5. Click “Save”.
