Articles
When the device turns to NDI mode, different encoding resolutions and NDI qualities will affect the encoding bit rate. The corresponding relationship is shown in the figure below: (mbps) HX HX2 HX3 Format H.264 H.265 H.264 H.265 H.264 H.265 2160p30 20 15 39 30 78 60 2160p25 17 14 34 27 68 54 2160p24 17...
Yes, ZowiePTZ supports adding unlimited Internet streams. Users can add multiple different Internet streams and use aliases to distinguish them. Once the setup is complete, users only need to open different buttons to start streaming.
Yes, it can. ZowiePTZ can push streams to up to four platforms at the same time (such as TikTok, YouTube, etc.), but it can only push streams to two platforms under the same protocol. That is to say, the stream can be only pushed to two platforms by RTMP(S) or SRT.
After the stream URL and key are set, they will be permanently saved in ZowiePTZ unless the ZowiePTZ is restored to factory settings. Whether users need to create or modify a streaming URL and key depends on the streaming platform. For example, YouTube’ s stream URL and key will never change. Users only need to...
In order to continuously improve and optimize the functions of Zowietek products, All Zowietek products has gone through multiple hardware version iterations. The specific hardware versions and corresponding functions are as follows: ZowieCam y=1(M12),2(CS),or 3(AF) Hardware Version UVC Out Fan Mode SDI Output 4k30->1080p30 4.y.2 × × √ 4.y.3 × × √ 4.y.6 × ×...
You can use two 58mm or 90mm U-bolts for installation—choose the size based on the diameter of your truss. First, secure the included ZowiePTZ bracket to the truss using the two U-bolts. Then, attach the ZowiePTZ to the bracket. The common American-Style Triple-Truss is shown in the image below. The U-bolt is shown in the...
Click [*] + [#] + [Manual] in sequence, ZowiePTZ will restart and restore the default username, password and IP settings. By default, the username and password are both admin, and IP DHCP is turned on.
Click [*] + [#] + [6] in sequence and the device will automatically restart and restore to factory settings.
+ 21 Articles
Show all articles
