Category - Quick Start

With software version 1.0.2.6 or later, ZowieBox will support NDI over WIFI. It allows users to use NDI without the restriction of LAN cables. To turn on the NDI over WiFi function, just follow the three simple steps below: 1.Check your software version, this feature can only be turned on in version 1.0.2.6 or later. 2.Click...

1. Type the IP Address of your ZowieBox into the browser. (The initial Admin Login Username and Password are both admin.) 2. Click “System > Update” on the Web console. 3. Click “Choose file” to upload the correct firmware file. 4. Click “Upgrade” to start the upgrade. Note: After clicking upgrade, ZowieBox will automatically upgrade...

There are two ways to power your ZowieBox 1. USB-C Use the USB TYPE C power adapter to power the ZowieBox and then the screen will turn on. 2. PoE ZowieBox can also be powered by Power over Ethernet (PoE/ PoE+). You needn’t prepare a power adapter. To take advantage of PoE, the LAN cable...

The default login account and password are both admin.

1. Type the IP Address of your ZowieBox into the browser. (The initial Admin Login Username and Password are both admin.) 2. Click “Network>LAN”. 3. Close the “IP (DHCP)”. 4. Set the IP address for ZowieBox. 5. Click “Save”.

1. Type the IP Address of your ZowieBox into the browser. (The initial Admin Login Username and Password are both admin.) 2. Click “System>System”. 3. Change the device name. 4. Click “Save”.

The Nintendo Switch itself does not have a video out port – you cannot connect it directly to ZowieBox, no matter what adapter you try to use. Instead, you must connect it to the special Nintendo Switch Dock that comes with the Nintendo Switch.  That Dock has HDMI out. 1) Plug one end of an HDMI Cable into the HDMI...

1. Reboot ZowieBox: Click “System > Default > Reboot” on the Web console to reboot ZowieBox. 2. Restoring factory setting： Click “System > Default > Restore factory default settings” on the Web console. Notes: a. Restoring factory settings will reset all information except record and WIFI, please choose carefully. b. The username and password of...

Yes, it will.

1. Connect the ZowieBox to the power source. 2. Connect the mobile device to ZowieBox’s hotspot, it is default on. Please find its SSID and password at the bottom of ZowieBox. After connecting to the hotspot, enter http:// 170.128.88.1 in the browser to log into the Web console. When connecting to the hotspot, the phone may prompt...

Connect the HDMI output port of PS5/4 to the HDMI IN of ZowieBox, and also connect the HDMI OUT of ZowieBox to a TV or monitor. Then, visit the Settings > System section of the PlayStation 5/4 interface, and turn off Enable HDCP. After that, you can use your PlayStation 5/4 with ZowieBox .

ZowieBox connects to the Xbox Series using HDMI.  It can passthrough video to a TV set also using HDMI.  An HDMI cable is included in the box. Before you set things up, make sure to connect your Xbox Series directly to your TV set or display via HDMI, without using ZowieBox. After that, you can use your Xbox Series with ZowieBox .

Yes. In order to use the feature.1. A PoE network work switch has to be available in the connected network.2. At least a CAT5e LAN cable has to be used.3. It can go even 100 meters (328 feet). In this case, a better LAN cable, such as CAT6 and higher, is recommended.