View live video on the computer...
Simply press the "Photo" button on the front panel or touch on the screen anytime during a video recording...
You can select the video source in the following ways...
Step 1: Enter the video playback list...
You can select the audio source in the following ways...
To set current clock of MediDVR, press the Menu button and the Setting button...
Press the Menu button, after enter Record item, tap Storage button...
Please use the USB flash drive with USB 3.0 interface formatted as FAT32 to ensure the writing speed and compatibility...
MediDVR records medical images & video clips from any medical video device (endoscope, arthroscopy, surgical camera, C-Arms, ultrasound etc.)...
Press the Patient button or touch on the screen...
Go to menu and press the "Setting" icon...
Yes. Press the "STORAGE" button and then use the left or right arrow button to change the devices you need. (USB 1 ↔ USB 2 ↔NAS↔HDD)...
The MediDVR provides three output interfaces of DVI, HDMI, and SDI...
You can only set the resolution of the video by modifying the resolution of the input device...
Before you start & use MediDVR, please refer the manual of your video source device to get the correct information of video output signal that your video device supply...
Digital Imaging and Communications in Medicine (DICOM) is the standard for the communication and management of medical imaging information and related data. DICOM is most commonly used for storing and transmitting medical images enabling the integration of medical imaging devices such as scanners, servers, workstations, printers, network hardware, and picture archiving and communication systems (PACS)...
Please refer follow table of support of various video source & different resolutions...
Download the new firmware on our product’s page.
Turn on the device.
Attention: Keep the encoder connecting power and internet during the upgrade, the upgrade process cannot be interrupted, otherwise the encoder cannot be restored...
Press the "STORAGE" button and then use the left or right arrow button to change the devices for playback...
Desktop MediDVR only supports copying HDD data to the USB storage medium in the USB1 interface. Please insert HDD and USB storage medium into the desktop MediDVR, and change the current storage medium to HDD. On the patient information list interface, select the patient information to be copied and press the Video button. All patient information...
Connect MediDVR to a network via a standard Ethernet cable or connect to WIFI, users can record videos “across the network” into a shared directory on a network drive. This section describes how to set up the necessary network connections. Getting Started To configure the network, follow these basic steps: Step1: Use an Ethernet cable...
The videos and photos can be recorded to one of the following locations...
If the USB device is full before recording or taking a picture...
First, the MediDVR should be connected to the network...
The desktop MediDVR is connected via RS232 to the surgical Camera/PTZ Camera...
Both of them are available, you can use the USB port on the back panel to connect the...
