Articles
MediCam provides four convenient and fast ways to log in to the web control interface. (1) IP address MediCam’s DHCP is on by default. Please connect the HDMI/ SDI output to the monitor, the IP address will be automatically displayed in the upper left corner for a period of time after MediCam is turned on;...
If the computer cannot search all NDI settings: 1. Check when your computer can log in MediCam’s web control interface. 2. Please close the VPN and other related software. 3. Please check whether you are using a private network orpublic network, and check whether all NDI software is allowed to pass through the “Allow an...
(1) DC Power Supply After the DC power adapter supplies power to the MediCam, the status indicator will light up. (2) PoE power supply MediCam can also be powered over Ethernet (PoE/PoE+) without a power adapter. If powered by PoE, a network cable must be connected to a PoE network switch with at least CAT5e...
User name: admin; Password: admin
1) Restart MediCam Click “System->Default->Restart” in the web control interface. 2) Restore MediCam to factory settings: (1) Click “System->Default->Restore factory default settings” in the web control interface. (2) Click the panel button MENU to bring up the OSD and select Restore Factory Settings.
1) Click “Streaning->Live” on the webpage.2) Click “+Add” to create a new network streaming task.3) Select the same protocol as the streaming address , enter the streaming address and key, and you can skip the streaming key.4) Entering the name of the network flow task and click save, the name will be shown in the...
