Overview
4K wireless PTZ camera, equipped with ~20X lens and high quality 4K CMOS sensor,support a precise body
tracking with the advanced AI capability. Support multiple cameras transmission with 4K resolution,up to 200
meters transmission, built-in battery, minimal configuration and setting.
Features
- Use a high -quality 1/1.8 inches UHD CMOS sensor with 8.42 million pixels.
Support max 4K30fps image output and multiple lower resolutions like
1080p/720p - 4K optical lens, support max 20× optical zoom and 60° horizontal field
of view, can cover the demand of Extra-large conferencing room and
other scenarios need larger optical zoom. - With the built-in AI capability and algorithms, camera can support
multiple tracking modes,including body tracking, hybrid tracking and
etc. - HDMI1.4b I/O, can output non-compressed video stream.
- Stable and reliable wireless transmission, it supports 2×2 MIMO and
transmitter beamforming technology, the maximum transmission rate
is 300Mbps, the penetration is strong, and the transmission distance is
as far as 200 meters. It supports automatic search and intelligent
configuration, high transmission efficiency - Support multiple ways of control, like Wireless, RS485, Network and
USB. - Output H.264 code current supports SLICE coding mode to adapt to
high -end USB conference video applications. - Can display information such as output resolution, battery power,
wireless signal strength, camera status, IP address and other information. - Standard lens hoods. Use a hood to inhibit the halo of the screen,
avoid mixed light into the lens, and especially adapt to wireless
shooting needs of the outdoor sunlight. - The new generation high performance CMOS image sensor can
significantly reduce the image noise in low illumination. With the 2D
and 3D noise reduction algorithms, even in an ultra-low illumination
environment,camera can still deliver a sharp and clean image with
more than 55dB S/N ratio - The built -in 9450mAh ultra -large -capacity lithium battery has
continuous energy, low power design, and 6H lasting battery life. - Compatible with USB3.0 and USB2.0. Support UVC1.1 and UAC1.0
protocols, support video original images and encoding image output. - At the same time, 12V power adapters, Type-C and built-in battery
power supply
Specifications
Camera | Signal System | 4K/30p, 25p; 1080/ 30p, 25p |
Sensor | 1/1.8 inches, CMOS, Effective Pixel: 8.42 Megapixels | |
Scanning Mode | Progressive | |
Lens | 20x, f = 6.25mm ~ 125mm, F1.58 ~F3.95 | |
Digital Zoom | 16x | |
Minimal Illumination | 0.5Lux @ (F1.8,AGC ON) | |
Shutter | 1/30s~1/10000s | |
White Balance | Automatic, indoor, outdoor, one touch, Manual, VAR | |
Backlight Compensation | Support | |
Digital Noise Reduction | 2D&3D digital noise reduction | |
Video S/N | ≥55dB | |
Horizontal Angle of View | 60° ~ 3.5° | |
Vertical Angle of View | 35.7° ~ 2.0° | |
Horizontal Rotation Range | ±170° | |
Vertical Rotation Range | -30° ~ +90° | |
Pan Speed Rang | 1.8°~80°/S | |
2.7° ~ 35.7° /s | 2.7° ~ 31.5° /s | |
Image Flip | Support | |
Automatic ICR (Automatic Switching of Infrared Filter) |
Support | |
Preset Position | Support | |
Image Freeze | Support | |
Preset Position | 255 | |
Hood | 0.1° | |
Input/Output Interface | USB Interface | 1 x USB 3.0, Type-C |
HD Output | 1 x HDMI 1.4b | |
Network Interface | 1xRJ45: 10M/100M/1000M Adaptive Ethernet | |
Audio Interface | 1 x LINE IN, 3.5mm Jack; 2 x Built -in microphone |
|
Control Interface | 1 x RS485 In(Optional): 3pin phoenix port, Max Distance: 1200m, Protocol: VISCA / Pelco-D / Pelco-P |
|
Power Interface | JEITA type(DC IN 12V) | |
Reset Button | Pinhole RESET | |
Remote Control Receiving |
Support | |
Switch | button | |
Display | Can display information such as output resolution, battery power, wireless signal strength, camera status, IP address and other information |
|
Network Features | Video Compression | H.265/H.264/MJPEG |
Video Stream | First stream, second stream | |
Main Stream Resolution | 3840×2160,1920×1080,1280×720 etc. | |
Second Stream Resolution | 1920×1080,1280×720,1024×576,720×576 etc.. | |
Video Bit Rate | 32kbps~20480kbps | |
Bit Rate Type | VBR, CBR | |
Frame Rate | 50Hz: 1fps~25fps, 60Hz:1fps~30fps | |
Audio Compression | AAC | |
Audio Bit Rate | 96Kbps,128Kbps,256Kbps | |
Support protocols | NDI®|HX2,TCP / I ,HTTP, RTSP, RTMP/ RTMPS , Onvif , DHCP,SRT,GB/T 28181,Multicast, etc. |
|
USB Spec | Operate System | Windows 7, Windows 8, Windows 10,Windows 11, Mac OS X, Linux, Android |
Color System / Compression | YUY2 / MJPEG / H.264 | |
Video Format | YUY2: Max.1440P30; MJPEG: Max.2160P30, H.264 AVC: Max.2160P30; H.265 HEVC: Max.2160P30 |
|
USB Audio | UAC1.0 | |
USB Video | UVC 1.1 | |
UVC PTZ Control | Support | |
Wireless Features | Wireless | 5.15~5.35GHz,5.425~5.725GHz, 5.745~5.850GHz |
Transmission Power | 27dBm | |
Antenna Mode | 2*2MIMO,Beamforming | |
Channel Bandwidth | 20/40MHz | |
Modulation Mode | OFDM | |
Data Rate | max to 300Mbps | |
Network Mode | point-to-point, point-to-multipoint | |
Penetration | 1~2 walls | |
Transmission Distance | 200 meters | |
Protocol | 802.11a/n | |
General Specification | Input Voltage | DC 12V |
Input Current | 3.0A | |
Battery | 9450mAh | |
Operating Temperature | 0°C ~ 40°C 32°F ~ 104°F |
|
Storage Temperature | -40°C ~ 60°C -40°F ~ 140°F |
|
Power Consumption | 36W (Max.) | |
Dimensions | 143mmx189.3mmx201.6mm | |
Net Weigh | 1.9kg |
Download
Item | Type | Update | Version | |
---|---|---|---|---|
Spec | 11/16/2023 | – | ||
Manual | 11/16/2023 | – | ||
Firmware | ZIP | – | – |
Order Information
Product | P/N |
---|---|
4K UHD Wireless PTZ NDI Camera | 90492-950 |
4K UHD Wireless PTZ Camera | 90482-950 |
Accessories | |
Random Accessories | power supply, remoter, manual, two WiFi antennas |
Selected Accessories | Zowietek wireless reciever |
NDI® is a registered trademark of the Vizrt Group