Explore the knowledge base through the menu on the left.

Search for answers by refining the results through the drop-down categories.

< All Topics
Print

How to Decode NDI Source

Views1638

1.Please first ensure that your ZowieBox has activated NDI.

Click Setting->System->NDI to ensure that NDI is activated.

2.Switch ZowieBox to decoder mode as shown in the link below.

3.Click Setting->Decoding->NDI to select the required NDI stream. ZowieBox will automatically display the searched NDI sources.

If ZowieBox’ s version is before 1.0.2.10, the page is as follows:

4.Please keep the output resolution consistent with the resolution of the NDI source, the link is as follows:

Tips:

  1. Please ensure that ZowieBox and NDI source are in the same network segment. Otherwise ZowieBoxwill prompt No Video
  2. ZowieBox supports decodingNDI sources whose format is HX/HX2/HX3 and rate is less than 60M. If the NDI source is Full NDI or other NDI format, please use NDI Bridge to convert it to HX format.
Table of Contents
×