How to use the UVC to HDMI function

For USB A port UVC/Webcam cameras, we recommend using a double-ended USB A cable.

For USB C port UVC/Webcam cameras, we recommend using a Type C to USB A cable, or a double-ended Type C cable plus a Type C to USB A adapter. (For example: DJI Pocket 3)

2.Log in to the web console, click Setting->System->Working Mode, and switch the working mode to Decoding Mode.

3. Click Decoding ->UVC, set the required resolution and frame rate, and click the button on the left to start decoding.

4. Users can also plug in four UVC cameras at the same time through a USB Hub.

If you need to use a USB Hub, please make sure that the USB port of the USB Hub is 3.0 or above. If the UVC camera needs to be powered by the USB port, please make sure that the USB Hub has the power supply function.

Note: 1.The highest supported resolution is H.264, 4k30, and the recommended bit rate is below 40M.

2.For UVC/Webcam cameras with a Type-C port, please do not use a USB-A to USB-C adapter and a double-ended USB-A cable for connection.

 3.UVC decoding currently does not support audio.