How to add a Camera to ZowieKBD via serial protocol?

1.Click ADD to add manually or click SETUP ->Device Management->CAM List->Add to add manually.
2.Use the up, down and top button of the joystick to move the cursor and modify the parameters.
3.Select the protocol as VISCA/PELCO D/P and enter the correct baud rate and protocol address. (The default baud rate of ZowiePTZ is 9600, and the default address is VISCA: 1, PELCO D: 1, PELCO: 0)
4.Cam numbers can be specified or automatically assigned in the order they are added.

If the camera supports RTSP streaming, please enter the camera’s RTSP URL and RTSP authentication and click Add.