How to configure SRT related parameters?

Currently, the SRT of the ZowieTek series products only support caller mode. If you need to use SRT for streaming or decoding, please make sure that the SRT used is in caller mode.

When performing relevant configuration, please make sure ZowieBox has a signal source first.

SRT streaming:

Log in to the device’s web console and click Setting->Streaming->Live.

Click the +Add button on the right to add a stream.

Select the protocol as SRT, enter the alias name and push URL, and click Save.

After saving successfully, click the Streaming button on the left to start streaming.

The SRT streaming URL follows the following rules: srt://<Server Address>:port?<Push Params>

For example:

srt://192.168.1.100:10080?passphrase=1234567890

srt://192.168.1.100:10080?streamid=#!::h=srs.srt.com.cn,r=live/livestream,m=publish

srt://host.com:10080?streamid=#!::h=live/livestream,m=publish

SRT decoding:

Login in to the web console. Switch ZowieBox to decoder mode as shown in the link below

https://zowietek.com/knowledge-base/how-to-switch-to-decoder-mode

Click Setting->Decoding->Local/Live, and click +Add to add a Local/Internet Stream. Enter the alias name and streaming URL and click Save. After saving successfully, open the button on the left to start decoding.

If you need to use SRT in vMix, click the link below for detailed steps:

https://zowietek.com/knowledge-base/how-to-decode-encode-srt-to-zowiebox-using-vmix/