How to use serial port to control ZowiePTZ

ZowiePTZ supports IP visca, VISCA, Peclo-D, Peclo-P and other protocols to control ZowiePTZ through RS232/485/422 interface.

1. If you need to use serial port to control ZowiePTZ, please read the pin definition below to connect the serial port correctly:

RS232 pin definition is as follows:

For the RS485 interface, please select the direct connection method for connection. The connection method is as shown in the figure below:

For the RS422 interface, please select the direct connection method for connection. The connection method is as shown in the figure below:

After successful connection, log in to the web console, click Setting->Camera->PTZ, and modify the protocol address and baud rate.

2. If users need touse Viscaover IP, you can log in to the web console, click Setting->Network->Port, and query the VISCA UDP/TCP port number.