Skip to main content
How Can We Help?

Explore the knowledge base through the menu on the left.

Search for answers by refining the results through the drop-down categories.

< All Topics
Print
  1. Go to the NDI advanced settings page.
  2. Find the NDI Group option, fill in the custom group name. Devices in the same group can discover each other, and devices in different groups are isolated from each other.
  3. To enable multicast mode, turn on the Multicast switch, and configure the multicast IP address and TTL parameters.
  4. It is recommended to use multicast mode in scenarios where one source is pulled by multiple receivers at the same time, which can effectively reduce the bandwidth pressure of the source end.
  5. Save the settings and restart the NDI service to take effect.
Table of Contents
×